How to do an access panel in a Fellert ceiling
To get accessibility to lighting, sprinkler, ventilation installations etc. in a fixed ceiling you’d need some kind of access panel.
The installation details below explains how to do this in two different ways.
First detail shows how to install a traditional hatch in line with the ceiling.
Second detail show how to install a drop down hatch.
If you desire the panel to have the same plastered finish as the rest of the ceiling, apply Fellert primer mixed with sand on the hatch and leave to dry. When dry spray hatch with Fellert plaster and trowel to the desired finish.
If everything is done perfectly right -it will look something like this:
The installation details along with many more can be found at www.fellert.com under the section “Facts of Fellert” Klick here
Leave a Reply